1 / 5
A single prototype and a repeat order of thousands of pieces run through the same shop - 26 three-axis and 10 four-axis machining centers, 12 CNC lathes and 5 wire cutting machines in a 5000 square meter workshop with a monthly output of 12000 pieces. Minimum order quantity is 1 pc.
Parts up to 1100 x 600 x 400 mm and turning diameters up to 380 mm are machined to +/-0.01 mm with surface roughness of Ra0.8-3.2, then checked on CMM and 2D optical comparators.
Send your 2D and 3D drawings as PDF, DWG, DXF, STEP or IGES and get DFM feedback with a quotation within 24 hours; samples are approved in 7 days and mass production ships in 10-30 days.
Drawing review, DFM feedback, first article inspection and full-dimension reports follow the same process on each order, with batch-to-batch consistency backed by 16 pieces of inspection equipment.
Aluminum 6061/7075, stainless steel 303/304/316/17-4PH, brass and copper, titanium TC4/Gr5, engineering plastics POM/PEEK/PA6 and tool steel are machined in house, with anodizing, plating, powder coating and heat treatment available without outsourcing.
Our minimum order quantity is 1 piece. We support both rapid single-piece prototyping and full mass production runs of thousands of units.
We accept 2D and 3D engineering drawing formats including PDF, DWG, DXF, STEP, and IGES.
We achieve tight machining tolerances held down to +/-0.01 mm, with surface roughness capabilities ranging from Ra 0.8 to Ra 3.2.
We provide standard DFM feedback and quotations within 24 hours. Prototypes and samples are typically completed and approved within 7 days.
We process Aluminum (6061/7075), Stainless Steel (303/304/316/17-4PH), Brass, Copper, Titanium (TC4/Gr5), Plastics (POM/PEEK/PA6), and Tool Steel, complete with in-house finishing such as anodizing, plating, powder coating, and heat treatment.
Every order undergoes rigorous drawing review, DFM analysis, first article inspections (FAI), and full-dimension measurement reports verified using 16 pieces of advanced equipment including CMM and 2D optical comparators.
